Table of Contents
Advertisement
19
The constants are typed into the windows associated with FuN2 (intercept) and the three measurement
components (FuAM2, FuBM2 and FuCM2) (1). Once the values are entered in the input windows, click the
"Write" button (2) above the PV2 column and select the recipe where store
coefficients. A write warning will appear and simply click "Yes".
After the operation is complete, a successful write message will appear. Click "OK".
If you wish to verify that the values were written, click the "Disconnect" button and
then reconnect to the transmitter, reopen the VC regression simulation window click
on the "Read" button (3) above the PV2 column and the values stored in the
transmitter will be displayed in the window.
Advertisement
Table of Contents
