Table of Contents
Advertisement
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
16
Use the UP/DOWN arrows to move to the Calibration sub-menu and press
ENTER button and the RECIPE sub-menu Will appear.
Press ENTER to enter the sub-menu.
The MA 1? menu Item will appear Press ENTER and the OFFSET sub-menu
will appear.
Press ENTER to enter the OFFSET sub-menu.
Use the UP/DOWN arrows to place the decimal separator in the proper
location and press ENTER. Note: the first digit on the left can be set to a (-)
sign so remember to account for this when entering the decimal. A
separator will appear to indicate the digit that will be modified. Use the
UP/DOWN arrows to change the number and press ENTER. The separator
will move right to the next position. After entering the offset, if any zeros
are left in the display press ENTER until the item right-hand is indicated
and press ENTER one more time. The SAVE? item will appear.
Press ENTER to save the value or ESC to cancel out of the operation. The
OFFSET sub-menu item will reappear.
Press the DOWN arrow to move down the menu to the GAIN sub-menu and
press ENTER to enter the GAIN sub-menu.
Use the UP/DOWN arrows to place the decimal separator in the proper
location and press ENTER. A separator will appear to indicate the digit that
will be modified. Use the UP/DOWN arrows to change the number and
press ENTER. The separator will move right to the next position. After
entering the gain, if any zeros are left in the display press ENTER until the
right-hand digit is indicated and press ENTER one more time. The SAVE?
Item will appear.
Press ENTER to save the value or Esc to cancel out of the operation. The
GAIN sub-menu Item will reappear.
Press the Esc key until the PV reading in the main menu is displayed.
Advertisement
Table of Contents
