Limited Warranty; Limited Warranty For Viega Heating And Cooling Solutions - Viega Climate Trak Installation Manual

Table of Contents

Advertisement

Limited Warranty

14 Limited Warranty

14.1 Limited Warranty for Viega Heating and Cooling Solutions

38 of 40
Hydronic Radiant Heating/Cooling and Snow Melt
Subject to the conditions and limitations in this Limited Warranty, Viega LLC
(Viega) warrants to property owners in the United States with hydronic radiant
heating/cooling and/or snow melt systems (the systems) properly installed
by Viega trained contractors that its Viega Barrier PEX tubing, under normal
conditions of use and properly maintained, will be free from failure caused by
manufacturing defect for a period of thirty (30) years from date of installation.
In addition, Viega warrants that Viega PEX press metal and polymer fittings
properly installed in the systems with the above listed tubing, to include protected
PEX press metal and polymer fittings used in slab, will be free from failure caused
by manufacturing defect for a period of thirty (30) years from date of initial
installation; warrants that any accessible metal compression or metal/polyalloy
crimp fittings, manifolds and panels sold by Viega and used in the systems will
be free from failure caused by manufacturing defect for a period of five (5) years,
and warrants that any controls, mixing stations, or electrical components sold by
Viega and used in the systems will be free from failure caused by manufacturing
defect for a period of two (2) years from date of initial installation.
Power tools and jaws used with press fittings are warranted by the manufacturer
and Viega extends no separate warranty on those tools or jaws. Viega warrants
that PEX press hand and pneumatic PEX hammer tools sold by Viega, under
normal conditions of use, shall be free from failure caused by manufacturing
defects for a period of two (2) years from date of sale.
Under this limited warranty, you only have a right to reimbursement if the failure
or leak resulted from a manufacturing defect in the products covered by this
warranty and the failure or leak occurred during the warranty period. You do not
have a remedy or right of reimbursement under this warranty and the warranty
does not apply if the failure or any resulting damage is caused by (1) components
in the systems other than those manufactured or sold by Viega or components
not recommended for use in the systems (2) not installing, inspecting, or testing
the products covered by this warranty in accordance with Viega's installation
instructions at the time of the installation, applicable code requirements and
accepted industry practices (for example, guidelines of the Radiant Professionals
Alliance); (3) improper design, including determining proper heat-load of the
system, or improper maintenance of the system; (4) exposure to unauthorized
solvents or chemicals, antifreeze, rust inhibitor or other treatment fluids; freezing;
or by failure to appropriately limit recommended water temperature levels or other
misuse or abuse of the tubing in the handling of the tubing prior to or during
installation or by other construction activity on the property; (5) acts of nature
such as earthquakes, fire, flood, wind, or lightning.
IM-HC 530590 0621 Climate Trak (EN)

Advertisement

Table of Contents
loading

Table of Contents