Related Manuals for Viega 8174.1
Summary of Contents for Viega 8174.1
- Page 1 Viega Gas Pressure Spring Instructions for Use only in connection with Viega Eco Plus WC element model 8161.22, for ceramic up to 28 kg Model Year built: 8174.1 from 07/2013 en_INT...
- Page 2 Viega Gas Pressure Spring 2 from 10...
-
Page 3: Table Of Contents
Labelling of notes About this translated version Product information Intended use 2.1.1 Areas of use Handling Assembly information 3.1.1 Required tools Assembly 3.2.1 Replace gas pressure spring 3.2.2 Preparing gas pressure spring for disposal Disposal Viega Gas Pressure Spring 3 from 10... -
Page 4: About This Instruction For Use
This restriction does not extend to possible operating instructions. The installation of Viega products must take place in accordance with the general approved rules of engineering and the Viega instructions for use. -
Page 5: About This Translated Version
German/European guidelines in this manual: The information is not binding for other countries and territories and should, as mentioned, be considered as support. Viega Gas Pressure Spring 5 from 10... -
Page 6: Product Information
Areas of use The gas pressure spring is exclusively suitable for the height-adjustable Viega Eco Plus WC element (model 8161.22). The gas pressure spring is used to lift and lower WC ceramic up to 28 kg. Viega Gas Pressure Spring... -
Page 7: Handling
WC ceramic is at the lowest position Following components are removed (see instructions for use of the cover plate 8356.8): – WC ceramic – cover plate – actuating button / hydraulic actuation – cover frame Viega Gas Pressure Spring 7 from 10... -
Page 8: Preparing Gas Pressure Spring For Disposal
– Do not remove the ends. – Under no circumstances use a lathe. – Put on eye / face and clothing protection. In case of doubt, please contact your Viega Service Center. The gas itself is harmless. Viega Gas Pressure Spring... - Page 9 ð Due to the high internal pressure, metal fragments and oil can squirt out. Using a 2–3 mm drill, drill slowly at point X2 until pressure drops and oil becomes accessible. Pour out the oil into a suitable container. Viega Gas Pressure Spring 9 from 10...
-
Page 10: Disposal
ð Disposal of the individual components can now take place. Disposal Separate the product and packaging materials (e. g. paper, metal, plastic or non-ferrous metals) and dispose of in accordance with valid national legal requirements. Viega Gas Pressure Spring 10 from 10...