System Start-Up; Station And Actuator Installation; Table 10 Station And Actuator Materials - Viega Climate Trak Installation Manual

System Start-Up

6 System Start-Up

6.1 Station and Actuator Installation

24 of 40
Material
Mixing Station
Three Position Actuator
Manifold, # outlets*
Basic Heating Control
Indoor Sensor
Press Adapters
Compression PEX Adapters
* Based on job requirements
Table 10: Station and Actuator Materials
1. Mount the Mixing Station using the mounting brackets.
2. Make the press connection for the supply and return lines to the
Mixing Station on the copper tee. Install tees as close as possible to
keep pressure difference at a minimum.
3. Connect the supply and return lines by soldering on a Viega PEX
Press adapter, then pressing on Viega Barrier PEX.
Quantity
1
1
1
1
1
4
*
IM-HC 530590 0621 Climate Trak (EN)