Table of Contents
Advertisement
Troubleshooting
POST Conditions and Results
Table 4
POST LED indicators is defined in
If the LEDs indicate a failure during POST:
1. Make sure that the HBA is seated firmly in the PCI slot.
2. Verify that the fibre cable connection to the HBA is secure.
Table 4: Normal POST LED Indicators
Amber LED (L1)
Off
On
Slow blink (1 Hz)
Fast blink (4 Hz)
Flashing (irregular)
Off
On
Slow blink (1 Hz)
Fast blink (4 Hz)
Off
50
lists the HBA LED states with descriptions of each.The position of the
Green LED (L2)
Off
Off
Off
Off
Off
On
On
On
On
Blink (1 Hz)
Figure 1
and
Table 2
Wake-up failure (dead board)
POST failure (dead board)
Wake-up failure (dead board)
Failure in POST (dead board)
POST processing in progress
Failure while functioning
Failure while functioning
Normal—1 Gb link rate
Normal—2 Gb link rate
Normal—link down or not yet started
Host Bus Adapter for Windows and Linux Installation Guide
of this guide.
State
Advertisement
Table of Contents
