HP StorageWorks A7298A Installation Manual page 43

8. Go to the scsi directory:
9. Add the following line (in alphabetical order):
10. Edit Makefile and add (with other CONFIG_SCSI_devices) a check for
11. Locate the following lines:
12. Add the following line:
13. For some 2.2 based kernels, edit hosts.c. Add the following lines:
Host Bus Adapter for Windows and Linux Installation Guide
The edited lines should now display as follows:
subdir-$(CONFIG_IDE) += ide
subdir-$(CONFIG_SCSI_LPFC) += scsi/lpfc
subdir-$(CONFIG_SCSI) += scsi
# cd /usr/src/linux/drivers/scsi
Edit Config.in and locate the following lines (the lines may wrap.):
dep_tristate 'EATA-PIO [old DPT PM2001, PM2012A] support'
CONFIG_SCSI_EATA_PIO $CONFIG_SCSI
dep_tristate 'Future Domain 16xx sCSI/AHA-2920A support'
CONFIG_SCSI_FUTURE_DOMAIN $CONFIG_SCSI
dep_tristate 'Emulex LightPulse Fibre Channel support'
CONFIG_SCSI_LPFC $CONFIG_SCSI
The edited lines should now display as follows.
dep_tristate 'EATA-PIO [old DPT PM2001, PM2012A] support'
CONFIG_SCSI_EATA_PIO $CONFIG_SCSI
dep_tristate 'Emulex LightPulse Fibre Channel support'
CONFIG_SCSI_LPFC $CONFIG_SCSI
dep_tristate 'Future Domain 16xx sCSI/AHA-2920A support'
CONFIG_SCSI_FUTURE_DOMAIN $CONFIG_SCSI
$(CONFIG_SCSI_LPFC), if defined. Add lpfcdd.o to the object list.
obj-$(CONFIG_SCSI_IPS) += ips.o
obj-$(CONFIG_SCSI_FD_MCS) += fd_mcs.o
obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o
obj-$(CONFIG_SCSI_LPFC) += lpfcdd.o
The edited lines should now display as follows.
obj-$(CONFIG_SCSI_IPS) += ips.o
obj-$(CONFIG_SCSI_LPFC) += lpfcdd.o
obj-$(CONFIG_SCSI_FD_MCS) += fd_mcs.o
obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o
#ifdef CONFIG_SCSI_LPFC
#include "lpfc/include/fc_os.h"
#endif
Installing the SCSI Miniport Driver
43