Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BYD ECB70
Summary of Contents for BYD ECB70
- Page 1 ECB70 | ECB80 OPERATOR MANUAL < OM-ECB70/802019001-EN >...
- Page 2 Welcome to use BYD electric forklift! May our electric vehicles bring greater convenience to your work ！ Please read the instructions carefully before you use the electric vehicle。 The instructions is a general instruction. We reserve the right to make technical modifications to electric vehicles.
-
Page 3: Table Of Contents
ECB70/80 ECB70/80 TRANSPORTATION AND STORAGE TABLE OF CONTENTS Loading, Transporting and Unloading FOREWORD Driving into the Transport Vehicle Transporting and Unloading Declaration Storage and Restoring Operation Notice Procedures of Storage Forklift Delivery Procedures of Restoring OPERATOR NOTICE MAINTENANCE Notice Operator Qualification... -
Page 4: Foreword
Inappropriate use of the BYD forklift might cause damages and losses, which the operators or proprietor instead of BYD should be held liable for. If the forklift needs to be operated in the Read through every chapter in the manual before operation for the correct use andmaintenance environments other than those mentioned in this manual, contact with your local BYD dealer first for of the forklifts. -
Page 5: Operator Notice
Please abide by relevant regulations and guide-principles, such as: The BYD forklift have notes or warning decals and signs to remind the operators of potential risks, as well as safety notices. Find and read all these decals and signs. -
Page 6: Vehicle View And Technical Specifications
OPERATOR MANUAL ECB70/80 VEHICLE VIEW AND TECHNICAL SPECIFICATIONS Technical Specifications Technical Drawing This chapter explains the overview of the forklift and its relevant technical specifications. Appearance Forklift Appearance Name Name Name Rear Wheel Load Backrest Using Area Charging Door Mast... -
Page 7: Battery Specifications
Height of Overhead Guard 2565 2565 Note Seat Height 1410 1410 Contact with your BYD local dealer if the forklift is intended to be used in the following Coupling Height environments: Overall Length 4745 4745 4.10 Length to Face Of Forks... -
Page 8: Nameplate And Decals
Serial No. Caution: Before operation, you must be familiar with specific requirement for output configuration by referring to the instruction manual. Add.: No.1, BYD Road, Zhenjiang Industrial Park, Shaoguan, Guangdong, China Made in China Note 1.The nameplate is placed on the left of the forklift. -
Page 9: Loading Capacity Chart
OPERATING Loading Capacity Chart This chapter explains how to operate BYD forklift correctly. When the load center exceeds the rated one, the loading capacity of the forklift is reduced. The Loading capacity chart indicates the maximum loading capacity the forklift has corresponding to the Seat different load center. - Page 10 OPERATOR MANUAL ECB70/80 2.Adjustment of lateral position of seat 5.Seat belt Pull up the recess of the lever. Move the seat forward and/or backward to find the right seat Pull out the seat belt slowly from the retractor, and then put the buckle end into the lock.
-
Page 11: Dash Panel
OPERATOR MANUAL ECB70/80 2.Working Indicator and Messages Dash Panel During normal work, the message is the current speed. Dash Panel Appearance After the forklift is switched on, if the seat is vacant, warning message of "Please return to the seat" will be displayed. -
Page 12: Start And Control
OPERATOR MANUAL ECB70/80 Start and Control 5.Indicators Using Area Overview Explanation on the 3 indicators: (1)Indicator related to error, which appears in the case of error. (2)Indicator related to the temperature, which appears when some components are overheated. (3)Indicator related to the battery, which appears in the case of low battery and battery failure. -
Page 13: Start And Control
OPERATOR MANUAL ECB70/80 Start and Control Ignition Switch Insert the key into the ignition switch and rotate it to turn on the forklift. Rotate the key reversely and take off it to turn off the forklif Note Before starting the forklift, pull up the right emergency disconnect switch. -
Page 14: Transporting Loads Loading
OPERATOR MANUAL ECB70/80 Travelling Transporting Loads 1.When travelling with load, make sure that the load is well centered on the forks. Loading 2.After the load is placed on the forks, keep the mast tilted backwards and raise the forks Load on the ground: above the floor. -
Page 15: Battery Charging
OPERATOR MANUAL ECB70/80 Battery TRANSPORTATION AND STORAGE This chapter explains how to transport and store the forklift. Charging Open the charge port, and then connect the charger connector. Follow the user manual of the charger to charge the forklift. Loading, Transporting and Unloading Driving into the Transport Vehicle Drive the forklift into the transport vehicle on turtle speed mode. -
Page 16: Storage And Restoring
(2)Check the floor where the forklift is parked for oil leakage. (3)Check the condition of the nameplate and decals. (4)Check if any parts loose or fall off. Note If oil leakage occurs, confirm the location of the oil leakage and contact the BYD after sales service. OM-ECB70/802019001-EN OM-ECB70/802019001-EN... -
Page 17: Regular Maintenance
If the working environment is harsh, the maintenance interval should be reduced, and advice (2)Check for the operation of buttons. from BYD after sales personnel should be sought. (3)Check the fasteners for looseness or missing. 9.Electric System Inspection (1)Check connectors and tighten the loose parts. -
Page 18: Type And Parameters Of Consumable Items
OPERATOR MANUAL ECB70/80 Type and Parameters of Consumable Items Warning Disconnect the battery before checking the electric system. Item Consumable Items Volume Needed Type Gear Oil Replacement Gear Oil As Needed Mobilfluid424 Chassis System Maintenance Braking Fluid Replacement Brake Fluid... -
Page 19: Braking Fluid Replacement
OPERATOR MANUAL ECB70/80 Braking Fluid Replacement 2.Free lift mast lift chain adjustment 1.Run the forklift until the driving axle gets lightly heated. Park the forklift on a level floor, apply (1)Loosen the upper and lower nuts of the lift chain, and then screw the middle nut to adjust the the hand brake, switch off the forklift, remove the key and press down the emergency disconnect length of the chain. -
Page 20: Hydraulic System Maintenance
4.Using unauthorized hydraulic oil might cause damage to hydraulic system. Use only authorized carefully and screw the cover plate. hydraulic oil. If you need to switch to other types of hydraulic oils, contact with the BYD forklift after sales service people. -
Page 21: High Pressure Filter Element Replacement
OPERATOR MANUAL ECB70/80 High Pressure Filter Element Replacement Electric System Maintenance 1.Park the forklift on a level ground and fully lower the mast and apply the parking brake. Take High Voltage Electric Inspection off the key, press down the emergency disconnect switch and open the seat cover fully. -
Page 22: Other Information
Tel: 045-290-6550; 045-290-6616 Fax: 81-(0)45-319-1506 Importer: BYD Auto Industry Company Limited Address: No.3009, BYD Road, Pingshan, Shenzhen, 518118, P.R.China Tel: +86-755-89888888 Fax: +86-755-84202222 Manufacturer: BYD (SHAOGUAN) CO.,LTD. Address:No.1, BYD Road, Zhenjiang Industrial Zone, Shaoguan, Guangdong, 512040, P.R.China Tel:+86-751-810 8888 OM-ECB70/802019001-EN...
Need help?
Do you have a question about the ECB70 and is the answer not in the manual?
Questions and answers