Keyspan USB Serial Adapter version 2.0 User Manual page 29

Keyspan USB Serial Adapter Software v2.x for Mac OS X User Manual
Note the serial port name in the
VirtualPC later.
Note: If you have a Keyspan product that has more than one serial
port, note the serial port name of serial port that your modem/cell
phone is connected to. Typically, the last 2 letters indicate the port
number on your Keyspan hardware (ie P1 = port 1, P2 = port 2, etc.)
Step 2
-
Launch and Configure VirtualPC to emulate a COM port
Launch VirtualPC by double clicking its icon. When VirtualPC is running, select the "...Set-
tings" command from the Edit menu. Please note that the VirtualPC menu bar may be hidden.
You may have to hold down the Command key (aka Apple key).
Once the Settings window is open, select USB. For Method 1, you will have to disable USB.
Make sure that the Enable USB check box is not checked (disabled) and that all other check
boxes are not checked (see next image).
*** IMPORTANT ***
Keyspan Serial Assistant
Rev 2006aug07 Page 29
. We will be selecting this port name in