Keyspan USB Serial Adapter version 2.0 User Manual page 28

Keyspan USB Serial Adapter Software v2.x for Mac OS X User Manual
This method assumes that you have already done the following:
• installed the Keyspan serial port hardware and MAC software only (not windows)
• installed the VirtualPC software
• installed your serial device software in Windows (in VirtualPC)
• connected your serial device hardware to a Keyspan serial port
If you have not performed any of the steps mentioned above, please do so before proceeding.
Step 1
-
Check the Keyspan Serial Assistant
Before proceeding, you should check to see if the Keyspan serial port is installed correctly.
Keyspan Serial Assistant
To do this, open the
Keyspan Serial Assistant
open the
Click on the TRIANGLE to the left of your Keyspan icon. This will display the names of the
serial port(s) on that Keyspan product as shown below:
, you will see a window similar to the one shown below:
the Keyspan Serial Assistant window
the Keyspan Serial Assistant window's triangle and port name
Rev 2006aug07 Page 28
(located in your Applications folder). When you