Table of Contents
Advertisement
HOSE CONNECTIONS
Note: If the riveting machine has an existing solenoid valve or pneumatic foot
switch, this system REPLACES these components.
Connect to air cylinder port that
opens the riveting mandrel. If cylinder
is spring return, install a 1/2" plug
into this bulkhead.
Connect to point after existing
airline lubricator.
Install two exhaust filters, provided with this system, into the two bottom ports.
Connect to point between air filter/
water trap and input to existing
pressure regulator.
Connect to air cylinder port that closes
the riveting mandrel.
SOFT TOUCH FOR PNEUMATIC RIVETERS |
7
Advertisement
Table of Contents
