Table of Contents
Advertisement
OPTIONAL DEPTH SWITCH RST-403, RST-404 CONTINUED
Wire the switch to match the appropriate hookup below.
USE IN PRODUCTION:
Turn the key counter-clockwise to the CONTINUITY position. The yellow panel indicator will
glow. In this position, high riveting pressure will only be applied when electrical continuity is
detected between the upper and lower riveting mandrels.
Turn the key clockwise to the DEPTH SWITCH position. The red panel indicator will glow.
After initiation, the riveting mandrel will close with low force. If the DEPTH SWITCH closes
before the maximum DETECT TIME (as set on the DIPswitch) has been reached, the LIMIT
SWITCH CLOSED light will glow on the annunciator panel and the riveting mandrel will go
to high force.
CAUTION: When the key switch is in the DEPTH
SWITCH position, the HIGH MANDREL FORCE will
turn on after the TEST SWITCH is closed. This will
happen even if a non-conductive material or body
part is between the riveting mandrels.
SOFT TOUCH FOR PNEUMATIC RIVETERS |
13
Advertisement
Table of Contents
