Figure 6-6 Ont In Wall Mount Bracket-Facing The Room - Nokia ONT Product Manual

Install a G-2426G-B indoor ONT
Wall mount an G-2426G-B indoor ONT
Figure 6-6 ONT in wall mount bracket—facing the room
3
Mount the ONT facing the wall using the wall mount bracket.
a. Determine the location of the two anchor holes for the wall mount bracket. The bracket can
be used as a template for marking and drilling the holes.
It is recommended to use a level to ensure that the ONT unit is installed properly.
b. Drill two holes 35 mm (1.37 in.) depth into the wall and with the centers spaced 157 mm (6.2
in.).
c. Insert the two mounting screws and optional anchors into the holes, leaving a 2 mm (0.078
in.) gap between the screw head and the wall.
d. At this point, perform a test to ensure that the wall mount bracket fits securely over the screw
heads. Mount the bracket flush to the wall so that it does not warp or twist.
June 2021
Issue 1
3FE-49441-ABAA-TCZZA
Nokia ONT
36748
77