Remote Control; Power On/Off And Mode Switch; Swing Mode - Adamson A40 User Manual

Remote Control

Temperature Adjustment
LED Wake Up

Swing Mode

Wind Speed Adjustment
Power ON/OFF

Power on/off and Mode Switch

Push the power button
Push the power button again to turn it off.
Push the "MODE" button to switch between the four modes of
Cooler/Dehumidication/Fan/Heater. On the Air Conditioner control panel, the corresponding
function indicator lights will turn on.
Swing Mode
Push the "SWING" button to make the air outlet swing from left to right. Push the "SWING" button
again to turn this mode off.
Push the "SPEED" button to switch between high speed and low speed. The corresponding speed
will be displayed at the bottom of the remote control display (high speed is displayed as 5 bars
where low air speed is displayed as 2 bars), and the corresponding indicator light will be
displayed on the Air Conditioner.
This function can only be used in the 3 modes of cooling/natural air/hot air.
LED
SWING
SPEED SLEED
on the remote control, to turn the power of the Air Conditioner on.
11
C
Display
C/ F
Celsius/Fahrenheit
Switch
MODE
Mode Switch
TIMER
Timer Setting
Air volume
adjustment