Ford ZD Escape Series Manual page 82

Accelerate
Push the cruise lever up and hold it, the
vehicle will accelerate. Release the lever
at the speed you want.
Push the cruise lever up and release
to operate the TAP UP function, each
TAP UP will increase the set speed by
approximately 1.6 km/h.
Accelerate with your accelerator pedal.
When the desired vehicle speed is
reached, push the cruise lever down and
hold for approximately 1 second to SET
the speed you want.
Decelerate
Push the cruise lever down and hold it.
The vehicle will decelerate. Release the
lever at the speed you want.
Push the cruise lever down and release
to operate the TAP DOWN function, each
TAP DOWN will decrease the set speed
by approximately 1.6 km/h.
Depress the brake pedal. The cruise
control will deactivate and once the
desired vehicle speed is reached, push
the cruise lever down and hold for
approximately 1 second to SET the
speed you want.
Cruise Control
Cancelling the set speed
The cruise control can be disengaged
by:
• Depress the brake pedal.
• Select neutral.
• Pull the cruise lever towards the
steering wheel.
Note: Disengaging the cruise control
by depressing the brake pedal/clutch
pedal/or selecting neutral will not erase
the previously set speed.
Note: To return to previously set speed
pull the cruise lever up and release for
the RES to operate. The vehicle speed
must be faster than 48 km/h.
• Press the
Note: Pressing the CRUISE switch will
erase the previously programmed set
speed.
Switching cruise control off
• The cruise control must be
disengaged, press the CRUISE
switch.
• Turn off the vehicle ignition (when
the vehicle is safely parked).
Note: Once cruise control is switched
off, the previously programmed set
speed will be erased.
-82-
CRUISE switch.