TonerRefillKits ReChargX RX161 Instructions Manual

ReChargX™ RX161 Instructions
For use in the Okidata 43324404, 43324403, 43324402,
and 43324401 Type C8 toner cartridges
The Okidata 43324404 (figure 1), 43324403
43324402 and 43324401 Type C8 are the toner
cartridges most frequently found in the Okidata
C5500, C5500N, C5650DN, C5650N and all other
machines using the same underlying engine.
This toner cartridge is quite easy to refill using our
ReChargX™ RX161 Premium Print Toner Refill Kit.
Within these ReChargX™ RX161 Premium
Print Toner Refill Kit instructions, we will be
adding new toner, emptying the waste hopper
and replacing the cartridge reset chip.
Tools Required:
Flat-blade screwdriver
Step 1: Locate the Toner Hopper Plug
Orient the toner cartridge so the side with the
large blue lever is facing upward. The toner
hopper plug is located on the blue lever, shown
by the white arrow in figure 2.
Step 2: Remove the Toner Hopper Plug
The toner hopper plug has a small prong located
in the six o'clock position in this orientation,
shown by the arrow in figure 3a.
TonerRefillKits.com
Mon - Fri 8am - 8pm ET
800.527.3712 or 352.343.7533
© 1995-2012 ReChargX™, EmptyX, TonerRefillKits and TonerRefillKits.com, the TonerRefillKits logo, the
ReChargX™ and EmptyX logos are trademarks owned by TonerRefillkits, LLC. All rights reserved.
Figure 1: The Okidata 43324404 toner cartridge
Figure 2: The toner hopper plug
Figure 3a: The small prong on the toner hopper plug
RechargX™ RX161 v1
2012.05.24
Page 1 of 10