Rear; Steering; Presentation; Steering Column - PEUGEOT 208 Rally 4 2021 User Manual

8.8.2.

Rear

The camber as well as the rear toe are also adjustable via shims installed between the rear hubs and
the cross member. These shims having open oblong holes, it is not necessary to remove the hub
completely; it suffices to loosen the four nuts to be able to mount / dismount the shims.
The car must always be equipped with three blocks: the 5mm track block, one camber shim and one
toe shim.
To obtain negative camber, the shim must slide over the top of the hub.
To obtain toe in, the shim must slide over the top of the hub and the tab located towards the rear of
the car.
For more information, refer to the setups in
8.9.

STEERING

8.9.1.

Presentation

The steering consists of a rack with hydraulic assistance generated by a pump driven by the
accessory belt.
8.9.2.

Steering column

Version E User Guide 208 Rally 4 - 22/01/2021
appendix 15.6.
Steering angle sensor
Dashboard display mount
Return to Content Table P 37