Table of Contents
Advertisement
R320LC-9 FC
. Inspection and
Maintenance
1. General
Inspection and maintenance help fully exhibit functions of the equipment and extend service life
of the equipment.
Pay particular attention to the following while operating the equipment.
- Are operating devices and meters functioning properly?
- Are there abnormalities in appearance, strange noise and heating?
- Are there loosened bolts and nuts?
- Have structures and parts been damaged, worn or disassembled?
- Is each part operating smoothly?
If an abnormality is discovered during operation or inspection, identify the cause and perform
maintenance immediately. If the cause is unclear or there is a problem in the hydraulic unit,
contact our company (Daemo Engineering).
2. Inspection Method
- Be especially careful about safety.
- Devise appropriate inspection and maintenance plans considering the conditions and
environment of use for effective inspection and maintenance.
- Only use parts approved by our company.
- Do not allow water and moisture to infiltrate into electric parts.
Caution:
Malfunctioning of electric parts is related to safety.
Never disassemble electronic parts.
Remodeling and alteration of the equipment is strictly prohibited.
23
Advertisement
Table of Contents
