Table of Contents
Advertisement
Unpacking and Moving the Library
Removing the Shipping Plate
To remove the shipping plate:
1. Connect the library to a grounded power source.
NOTE: Do not turn the library on.
2. Unlock and open the front library doors:
a. Using the key from the accessory kit, unlock the door.
b. Lift the door handle straight up and then turn the handle counterclockwise to
unlatch it.
c. Gently pull the door handle to open the door.
3. Remove the foam pads from inside the front doors and around the robotics.
4–16
ESL9000 Series Tape Library Unpacking and Relocating Guide
Advertisement
Table of Contents
