Seecode Mini Massage Gun Manual page 12

The signal lamp lights up red when the power is less
than than 10%.
The signal lamp lights up red when the battery is being
charged.
Charge
Insert the USB plug into the power adapter (not
included)
Please ensure that the device is fully charged before
using it for the first time. Connect it to a suitable charger
(DC5.0 ± 0.25V) using the USB cable provided.
The signal lamp lights up red when charging and green
when fully charged (approx. 3.5 hrs.). Disconnect the
charger from the massager when charging is complete
to prolong the life of the battery.
If the red signal light comes on during use, recharge the
massage gun as soon as possible.
The massage gun cannot be used while charging.
Application
seconds until the unit switches off.
Setting the massage speed
Press the start button once in the fourth level to return
12
Switching on / off
Press and hold the start button for
three seconds. The signal lamp and
the indicator lights light up and the
unit starts. To switch off, press and
hold the start button again for three
After switching on, the first level is
automatically switched on. Press the
start button again to switch up one
level at a time. The highest level is
the fourth level.