Table of Contents
Advertisement
2 Specifications & Performance
2.1 Pump Specifications
PSD06 Pump Performance Specification
Theoretical
Flow
Displacement
Rate
Per Cycle
28 lpm
0.04 L
(7.4 gpm)
(0.011 gal)
All tests performed with water at ambient temperatures and PTFE check balls.
1.
Pump Specifications are subject to change based on configuration ordered
2.
Suction lift diminishes with wear of pump, minimize suction lift to maximize performance
3.
dB Level at 100 psi 50 CPM (top) and 100 psi maximum CPM (bottom)
4.
The passing of solids may shorten the life of the pump
5.
Minimum startup pressure (Max supply pressure)
STORAGE
PSD pumps that are not put into operation upon delivery must be stored in an environment where they are
protected from moisture, extreme temperatures, UV radiation, vibration, and should be kept clean. White Knight
recommends an environment of ambient temperature (between 60° F (15°C) and 80°F (25°C)) with a humidity
level below 65%.
Maintenance and Torque Values
Upon installation of the pump, as well as after a few hours of operating the pump, the head and manifold bolts
must be re-torqued. Tie bolts and manifold bolts must be re-torqued to values specified in the table below.
Re-torqueing will be required after the pump has set for extended periods of time, run in thermal cycling
applications, been dismantled, or when there is a large difference between environmental temperatures and fluid
temperatures. See torqueing instructions on page 15.
Tie Bolts
Manifold Bolts
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Copyright © 2022 White Knight Fluid Handling | A Graco company
1
Suction
Suction
Pressure
Lift Wet
Lift Dry
9.5 m
3 m
2
(31.2 ft
)
(10 ft)
Assembly Torque in-lbs. (kg-cm)
20 (23.0)
20 (23.0)
Sound
Sound
Size of
3
3
Power
Passible
dB(a)
dB(a)
Solids
60.2
54.45
2 mm
82.04
66.1
(0.08 in)
Re-torque Spec in-lbs. (kg-cm)
9/14/2022 Version 1.1.6
187 E. 670 S., Kamas, UT 84036
435.783.6040 888.796.2476
Max.
Max
Operating
Temperature
4
100°C TE
70°C UH
15 (17.3)
15 (17.3)
Page
Air
Supply
Pressure
5
Limits
30 psi
(100 psi)
| 2
Advertisement
Table of Contents
