Function Menus - Planar VitalScreen S VSS17SX Operation Manual

Function Menus

The following tables describe the main menus and submenus.
Monitor-Control.
characteristics such as the horizontal or vertical
position, display phase, display clock, and factory
reset. Adjusting these settings is necessary if the
results from the Auto Adjust function are not
satisfactory.
Pressing the Adjust PLUS or MINUS button displays
the Monitor-Control submenu. Use the Function
LEFT or RIGHT button to select a submenu item.
Auto-Adjust.
parameters to optimum values.
H-Position.
to move the display image left or right on a horizontal
plane.
V-Position.
to move the display image up or down on a vertical
plane.
Phase.
fine-tune the display image.
Clock.
adjust the display pixel number alignment.
Reset.
all the Monitor-Control submenu settings.
Graph/Text.
between the text and graphic options.
Port-Select.
if no signal comes the Auto-Detection function is
activated.
Exit.
the Monitor-Control submenu.
Monitor–Control Menu
Allows you to adjust the display
Select Auto-Adjust to set the display
Press the Adjust PLUS or MINUS button
Press the Adjust PLUS or MINUS button
Press the Adjust PLUS or MINUS button to
Press the Adjust PLUS or MINUS button to
Press the Adjust PLUS or MINUS button to reset
Press the Function Enter button to switch
Switch between analog and digital mode;
Press the Adjust PLUS or MINUS button to exit
Display Controls 11