Table of Contents
Advertisement
Parts identification
A Main body
1 Protective cap
2 System outer foil
3 Foil frame
4 Foil frame release buttons
5 Power switch
6 Lamp display
a. Battery capacity lamp
b. Charge status lamp (
7 Appliance socket
8 Outer foil section
9 System outer foil
release buttons
8
Back
a
b
: Inner blades
B Charging stand (RC9-86)
Charging plug
Stand socket
C AC adaptor (RE9-82)
Adaptor
Power plug
Cord
)
Appliance plug
Accessories
D Cleaning brush
E Lubrication oil
Charging
• Turn the appliance off.
• Wipe off any water droplets on the appliance socket.
1
Connect the appliance plug to
the stand socket.
2
Place the appliance on the
charging stand.
3
Insert the adaptor into a
household outlet.
• Charging is completed after approx. 1 hour.
►Display while charging
While charging
(Low battery
While charging
capacity)
( /
4
Disconnect the adaptor after charging is completed.
(For safety and energy saving)
<How to check that charging is completed>
Insert the main body again after removing it from the charging
stand. If the lamps glow and then turns off after 5 seconds,
charging is completed.
2
5 seconds later
After charging
after charging
is completed
is completed
:Glows,
:Blinks, /
:Turns off)
3
1
Advertisement
Table of Contents
