Table of Contents
Advertisement
Removing and mounting the outer foil and
the inner blades
►Outer foil section
Remove the frame by pushing the frame
release buttons.
Align as illustrated, securely attach the
outer foil section to the head until it clicks.
►System outer foil
• Do not throw away the foil frame.
Press the system outer foil release buttons
and pull down the system outer foil.
• Do not press the system outer foil release
buttons with excessive force. Doing so may
bend the system outer foil, preventing
complete attachment to the foil frame.
Align as illustrated, securely attach the
system outer foil to the foil frame until it
clicks.
►Inner blades
Remove the inner blades one at a time.
Insert the inner blades one at a time.
Replacement parts
Replacement parts are available at your dealer or Service Centre.
System outer foil and inner blade WER9013Y1361
Lubrication oil
• We recommend Panasonic lubrication oil WES003P.
Lubrication
Apply the lubrication oil to the blade after use.
1. Apply one drop of lubrication oil to each of the
system outer foils.
2. Turn on the power and allow to run it for
approximately 5 seconds.
3. Turn off the power and wipe off any excess lubrication
oil from the system outer foil with a soft cloth.
Troubleshooting
Problem
The appliance has
become blunt.
Operating time is short.
Appliance stopped
functioning.
WES003P
Action
Until problems are solved, please
follow each procedure as follows;
1. Charge the appliance.
(See page 8.)
2. Clean the blade and apply
lubrication oil.
(See pages 10 and 11.)
3. Replace the blade.
(See this page.)
11
Advertisement
Table of Contents
