NEC SIGMABLADE N8406-035 User Manual page 6

10gb pass-through card, 10gbase-sr sfp+ module, 1000base-t sfp module
Table of Contents

Advertisement

 
Note
1. No part of this guide may be reproduced, transmitted, translated in any form, or converted to
medias without prior written permission
2. The contents of this guide are subject to change without prior notice.
3. All efforts have been made to ensure the accuracy of all information in this guide. If you find any
part unclear, incorrect, or omitted in this guide, contact the sales agent where you purchased this
product or the company.
4. The company assumes no liability arising from the use of this product, nor any liability for
incidental or consequential damage arising from the use of this guide regardless of 3 above.
5. This guide is created for the manager or the maintenance person who is well informed about the
operation of this device. Note that the basic information, such as the operation procedures of
the device and OS, is omitted.
6. This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction guide, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at one's
own expense.
NEC Corporation 2010
No part of this guide may be reproduced or changed in any form without prior written permission of NEC
Corporation.
CE Statement
Warning: This is a Class A product. In domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures (EN55022).
CANADIAN NOTICE
 
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
BSMI Statement
CLASS 1 LASER PRODUCT for N8406-037
N8406-037 10GBase-SR SFP+ module is classified as a CLASS 1 LASER PRODUCT.
這是CLASS 1 LASER PRODUCT。該標籤貼於系統的內部光碟。
 
 
10GBase-SR SFP+ module

Advertisement

Table of Contents
loading

Table of Contents