Changing The Battery - Schaudt CSV 410 Instruction Manual

Caravan-charging system
Table of Contents

Advertisement

Operation on towing
vehicle
5.3

Changing the battery

Starting up
the system
8050102 BA / EN
Operating manual for caravan-charging system CSV 410
CAUTION!
Y
Battery discharge
Towing vehicle can no longer start:
Switch off the ignition when the towing vehicle is stationary.
F
Changing the battery
CAUTION!
Y
Use of incorrect battery types or incorrectly rated batteries.
Will damage the battery or the devices connected up to the caravan char-
ging system:
Batteries should only be changed by qualified personnel.
F
Follow the battery manufacturer's instructions.
F
The caravan charging system is to be used solely for connecting the
F
12 V power supply to 6-cell lead-gel or lead-acid batteries. Never use
non-approved battery types such as NiMH batteries.
Normally only batteries of the same type and capacity should be used,
Y
i.e. the same as those installed by the manufacturer.
It is possible to swap lead acid batteries with lead gel batteries. You can-
Y
not change over from lead-gel to lead-acid batteries. Contact the vehicle
manufacturer for more information.
 Disconnect the battery from the caravan charging system by switching
the 12 V main switch off.
 Unhitch the caravan from the towing vehicle.
 Replace battery.
 After changing the battery, recheck which type of battery has been inser-
ted.
DANGER!
Y
Incorrect setting of the battery selector switch.
Risk of explosion due to build up of explosive gases:
Move the battery selector switch to the correct position.
F
CAUTION!
Y
Incorrect setting of the battery selector switch.
Damage to the battery.
Move the battery selector switch to the correct position.
F
 Disconnect the caravan charging system from the mains before resetting
the battery selector switch.
 Move the battery selector switch (Fig. 2, Pos. 21) to the correct position
using a thin object (e.g. a ballpoint pen):
Lead gel battery: Set the battery selector switch to "Lead-gel".
F
Lead acid battery: Set the battery selector switch to "Lead-acid".
F
 Start up the system as described in Section 5.2.
Date: 20.02.2020
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents