Advertisement
10) Test 10: Board ID Test
The LCD should display the following:
Upon the user pressing [PLAY] the system will test that the front panel PCB and
main PCB are both stuffed for the same product
Or
11) Test 11: BootVers. Check
The LCD should display the following:
Upon the user pressing [PLAY] the BootVers check.
When the test is executed, the LCD should show:
Pressing [STOP] will stop the test and jump back to the diagnostic menu.
3. OS Version and SOUNDROM Version check:
1) When powering on the unit press and hold the [SYSTEM SETUP] button to verify
the OS firmware is version v1.03a.
When the test is executed, the LCD should show:
2)Pressing [
PAGE] button to verify the SOUNDROM is version V1.06d.
The LCD should show:
Reboot the unit.
Diags
Board
BOARD
Passed
BOARD
Failed
Diags
Vers.
BootVers
1.01
VERSION
V1.03a
SOUNDROM
V1.06d
Advertisement
