Alesis Performance Service Manual page 36

When the test is executed, the LCD should show:
The user will then strike the pads one at a time. When each pad is struck, its number
and the input velocity shall appear on the second line, such as:
or
Once all pads are struck the LCD will display:
Pressing [STOP] will then bring the user to the test select page. Pressing [STOP]
during the test will abort the test, and the LCD will display:
5) Test 5: FootSW Test
The LCD should show display the following:
When the test is executed, the LCD should show:
PADS
PADS
Tom1V7
PADS
Tom1V0
PADS
Passed
PADS
Abort
Diags
Footsw
FOOTSW