Alesis Performance Service Manual page 37

The user will then press the footswitches one at a time. When each pad is pressed, its
name shall appear on the second line, such as:
and
Once all footswitches are pressed the LCD will display:
Pressing [STOP] will then bring the user to the test select page. Pressing [STOP]
during the test will abort the test, and the LCD will display:
6) Test 6: Jog Test
The LCD should show display the following:
When the test is executed, the LCD should show:
As the user turns the jog wheel, the value should update on the display by increasing
or decreasing the current value. The second line should show the current integer
value in signed format.
7) Test 7: Audio Out Test
The LCD should show display the following:
When the test is executed, the LCD should show:
FOOTSW
Kick
FOOTSW
HHat
FOOTSW
Passed
FOOTSW
Abort
Diag
Jog
JOG
0
Diags
Audio