Hover-1 EAGLE EU-H1-EGE Original Instruction page 30

SCOOTER HANGTAG
DISPLAY OPERATION
Powering On the Scooter
Press and hold the Power Button for 3s.
Turning Off the Scooter
Press and hold the Power Button for 3s.
Switching Between High / Low Speed
Make sure the scooter is on, and press the
power button once to switch between
the two speed modes.
Riding the Scooter
Give a strong kick to begin riding your
scooter, then use the throttle to speed up.
A minimum speed of (3 km/h) must be
reached before you can use the throttle.
SCOOTER HANGTAG
EAGLE
DISPLAY OPERATION
Enabling Cruise Control
Maintain a minimum speed of 3 mph (5
km/h), choose your desired cruising speed
and press the throttle twice. The scooter
will enter Cruise Control and beep to
confirm. The Cruise Control icon will now
appear on the display.
Disabling Cruise Control
While using cruise control, press the brake
to slow down, or press the throttle once.
Doing so will cancel cruise control and the
icon will disappear.
Headlights / Tail Light
Make sure your scooter is turned on. Press
the power button twice to turn your
headlights and tail light on or off.
29
EAGLE
eu