Table of Contents
Advertisement
Digi-Pas
®
2.3. Alternate Zero mode
To operate in "Alternate Zero" mode, place device on the surface to be measured &
"ALTERNATE ZERO" button, "ALT" icon show up on LED display and measurement
press
value should indicate 0.
To exit Alternate Zero mode, press
2.4. Turn Device Bluetooth on/off
To turn Bluetooth on/off user needs to press & hold
off.
© 2022 Digipas Technologies Inc. All Rights Reserved.
Place the device on the surface to be measured. Press
"MODE" button to start the measurement and wait
until countdown number reaches zero.
Please ensure the contact surfaces of the device and
measuring plane are clean and free from dust particles.
Next, the screen displays "2" turn the device 180° press
(reverse direction) and press
the measurement and wait until countdown reaches
zero.
Once completed step 1& 2, "ABS icon" on top left cor-
ner of display lights up to indicate that the device is in
Absolute Level mode.
To exit ABS Mode press
"ALTERNATE ZERO" button once, ALT icon turns off.
Figure 5.
Device display in Alternate zero mode
Figure 6.
Bluetooth logo turn off on LED Display
DWL-1900XY Instruction Manual
"MODE" button to start
"ON/OFF" button.
"MODE" button until "BT" icon turns
www.digipas.com
4
Advertisement
Table of Contents
