Table of Contents
Advertisement
Digi-Pas
®
1.4. List of Items
Item No.
Description
1
Smart Digital Machinist Level
2
Certificate of calibration
3
Quick Guide
4
Machinist app redemption card
5
Magnetic V-Pad
2. OPERATION PROCEDURE
Insert 2 pieces of "AA" batteries into the battery compartment and press ON/OFF button.
Alternatively, insert USB power source to the USB Port to power up the de- vice. Take note
that the device performance might be affected when a poorly regulated USB power
source is used.
Please ensure batteries are inserted incorrect polarity direction for a device to work.
2.1. Switching Axis reading
To change display reading value from X to Y axis or vice versa, press
green arrow-head signs on left/right screen indicate X-axis measurement while top & bot-
tom arrow-head signs indicate Y-axis measurement.
2.2. Absolute Level mode
To operate in "Absolute Level" mode, press & hold
for ≥ 2 seconds, ABS icon (on top-left corner) & number "1" show up on LED display.
© 2022 Digipas Technologies Inc. All Rights Reserved.
a
Figure 4.
(a) Y Axis measurement direction, (b) X Axis measurement direction
Table 1. List of items
"ALTERNATE ZERO" button
DWL-1900XY Instruction Manual
Quantity
1 Unit
1 Set
1 pc
1 pc
1 pc
"MODE" button, the
b
www.digipas.com
3
Advertisement
Table of Contents
