Advertisement
IMPORTANT
Ÿ
Use a soft cloth between these parts and the floor.
Ÿ
Do not use power tools above 8 volts to assemble.
Ÿ
Do not tighten all bolts until each part is properly assembled.
Ÿ
Keep Hex Wrench and Wrench as bolts and casters may need to be tightened in the future.
STEP 1
Attach Magnets to Shelf (D)
with Wood Screws into pre-drilled holes,
then tighten. (See Figure 1)
E
Assembly Instructions 2/7
Wood Screw
Magnet
D
B
D
A
Head Cap Bolt
Dowel
pre-drilled holes in Side Panel (B).
Attach Base (E), Shelf (D) and Top (A)
to Side Panel (B) with Head Cap Bolts.
Figure 1
Figure 2
Figure 3
STEP 2
Insert Dowels into
(See Figures 2 and 3)
Advertisement
