Table of Contents
Advertisement
4. Steps 2 and 3 will repeat for additional Pulses in the test
5. "Recording Background Pressure"
6. Test Complete
The screen will then present test results (unless a test has been fired without parameters). Also presented is
"Test Status" information, with feedback to the quality and success of each step in the test, and the test as a
whole. Further training can be provided for a deeper understanding of this feedback.
Select one of the following options:
"Back to Test" will re-open the testing menu
"Main menu"
8.3 History and back-up
This menu can be used to back-up and export testing data (in either .pat or .csv format depending on Pulse
model and software version being used) to a USB stick, delete testing data, re-run tests, or show historic results.
Whilst the memory capacity of the Pulse system is significant and can support upward of 150,000 tests, we
recommend as a general rule that a back-up of all test results is made at the end of each day's testing by
exporting your tests to a USB stick. This will minimise the risk of tests being accidently deleted or being corrupted
should there be any issues with the unit software.
NOTE: it is strongly advised that a freshly formatted USB stick that has been scanned by reputable virus and
malware protection software is used in order to minimise the risk of corrupting the Pulse operating system.
Page 22 of 28
Advertisement
Table of Contents
