Advertisement
9. Put the protection casing back onto the body.
The Easylube can be remote mounted up to 4,5 meter from the application, but only if the
grease properties such as viscosity, consistency and operating temperature range are
suitable.
Battery usage
► The battery pack is designed to use 40% of it's capacity for grease dispensing and 60% for
the red indicator alarm. The alarm function is the most important feature of Easylubeas it will
inform users when lubricaotr fails to feed grease into the bearing.
► Other single point lubricators without alarm function are unable to warn users when no grease
grease or only oil ( through separation from soap) is being fed into the bearing.
► Therefore it is importnt to replace the battery at the end of a dispensing period or anytime the
voltage is below 6V/
Table 3 . Lubricator dispense period compared with DIP switch lever positions and battery life
Dispense
DIP
period in
switch
"ON"
months
1
1
2
2
3
1 + 2
4
4
1+4+8
Back**
2+4+8
* The number of days is approximate and is base don a system counterbalance under 45psi(3bar).
*** Test is simulated examination of automatic greasing program control.
Caution:
Always dispose of batteries in compliance with local envirmental protection laws. Do not puncture
or burn the battery pack. Toxic materials may be emitted and cause injury.
Battery life
Dispense
in days *
period in
months
87
5
114
6
140
7
168
8
of
Test***
Note: Refer to step 3 for location of DIP switch levers.
** Back is for dispersing pressure inside of the cup.
BONDIS bvba – Cleydaellaan 16/1 – 2630 Aartselaar – BELGIUM
Tel .: +32 3 234 29 18 – Fax: +32 3 233 13 10 – Email: info@bondis.com
ISO 9001:2008 n° 22714 – www.bondis.com
DIP
Batery life in
switch
days*
"ON"
1+4
194
2+4
221
1+2+4
245
8
277
All "On"
Dispense
DIP
period in
switch
"ON"
months
9
1+8
10
2+8
11
1+2+8
12
4+8
All "Off"
OFF
Battery life
in days *
300
328
351
382
Advertisement
