Advertisement
I. Attach the base.
1. Remove the motor shaft cover
from the motor shaft.
2. Thread the power cord into the
hole in the base.
3. Insert the stand to the base to fit
the convex portion of the stand
in the recess portion of the stand.
II. Attach the rear guard.
1. Insert the rear guard to the motor
cover to fit the convex portion of
the motor cover in the holes in
the rear guard.
2. Turn the guard fixing ring
clockwise to fix the motor cover.
A
ttach the fan.
III.
1. Insert the fan to the motor shaft to
fit the pin of the motor shaft in the
convex portion of the fan.
2. Turn the fan cap
counterclockwise to fix the
Recess portion.
IV. Attach the front guard.
1. Insert the front guard to the rear
guard to attach the hook of the
guard ring to the mark of the rear
guard.
2. Close the hook to fix the front
guard to rear guard.
Installation
Motor shaft cover
Convex portion
Motor cover
Convex portion
Motor shaft
Convex portion
Rear guard
4
1. Remove
Recess portion
3. Insert
1. Insert
Handle
Recess portion
Fan cap
Pin
1. Insert
Mark
1. Insert
Guard ring
Stand
2. Thread the
power cord
Base
2. Turn clockwise
Guard fixing ring
2. Turn
counterclockwise
Hook
2. Close the hook
Advertisement
