Rotating The Logo - Electro-Voice Tour X Series User Manual

Tour X Series Loudspeakers
4.3

Rotating the logo

All Tour X loudspeakers have logos that can be rotated (horizontally or vertically) to the user's
desired orientation. The logo is mounted on a spacer that has the signature "backbone" notch
profile of Tour X grilles.
To rotate the logo:
1.
2.
3.
4.
5.
Electro-Voice
Remove the six (6) or eight (8) screws that attach the grille to the enclosure (Figure 8).
Remove the one (1) screw on the back of the grille that attaches the spacer to the grille.
Rotate the logo and spacer (in increments of 90°) to the desired orientation.
Reattach the spacer to the grille using the one (1) screw.
Be sure that the screw is tight enough so as not to rattle during use, but not so tight the
logo warps inward.
Reattach the grille using the six (6) or eight (8) screws.
User manual
Installation | en 13
03-2022 | 08 | F.01U.196.114