Table of Contents
Advertisement
10
en | Installation
4.1.1
Recommended suspension methods
Warning!
Eyebolts must be fully seated and oriented in the plane of pull. Always use fender washers at
!
least 1.5 inch in diameter and 1/16 inch thick under the eyebolt to distribute the load on the
enclosure.
Figure 4.3: Eyebolt with and without washer. Eyebolts oriented in the plane of pull: correct and incorrect.
Maximum working load
Figure 4.4: Vertical orientation, pull-back (rear) point and horizontal orientation
03-2022 | 08 | F.01U.196.114
15°
15°
15°
15°
User manual
Tour X Series Loudspeakers
15°
15°
Electro-Voice
15°
15°
Advertisement
Table of Contents
