Table of Contents
Advertisement
4-1-1-4-3.COAX [UP THE COAX] Control
•
Displays the current setting mode at the top of the screen.
•
Press the SET KEY in MULTI WAY KEY selection to select PAN/TILT mode or ZOOM/FOCUS mode.
- RED: P.T.Z MODE - BLUE: OSD MODE
•
Press the Mode KEY to select the CAMERA OSD control mode.
•
Press the MENU KEY to control the CAMERA OSD, and the ESC KEY to exit OSD MENU.
For BOX/DOME Cameras, Hold the ENTER KEY to select OSD Menu
•
Press the EXIT KEY to go to the previous mode. In CAMERA OSD mode, switch to PAN/TILT mode first
in order to exit.
•
Press / / / buttons following the OSD guidance on the screen.
•
List of controllable models
No.
Company
01
Samsung Techwin
02
Pelco
03
Dongyang Unitech
04
Samsung E
※ PELCO-C PROTOCOL in Hybrid Test monitor is compatible with all the product models above.
Also, this product can control COAX in a remote side through the automatic NTSC/PAL
recognition without any set-up.
4-1-1-4-4. ANALYSER
•
Using Analyser mode, the test monitor recognises the received data packet and displays the address
and command.
•
Addr: Show the address.
•
Cmd: Show the command
•
Packet: Show the Hex code of the received data.
14
Protocol
PELCO-C
PELCO-C
PELCO-C
A1
Hybrid Portable Test Monitor
Product Model
All models to support
COAX communication (WINNER 5)
All models to support
COAX communication
All models to support
COAX communication (PIXIM)
All models to support
COAX communication
Advertisement
Table of Contents
