Monteringsanvisning (från sändare till
spakknopp (tillbehör)). Styrning av vikplog
1. Ta bort genomföringspluggen på sändaren.
2. Öppna sändarlådan (4 skruvar på undersidan).
3. För in inkopplingssatsens kabel med de 5 ledarna
genom lådans hål och montera genomföringen.
4. Connect the cables into the two connectors supplied,
according to figure 9. Leave position 1 open
according to figure 9 and then in the colour order
according to figure 8. Remember that the lugs should
be upward on both the connections according to
figure 9.
5. Cable A, green.
6. Cable B, yellow.
7. Cable C, grey.
8. Cable D, white.
9. Cable E, brown.
10. Skruva fast sändarens bottenplatta.
11. Dra åt/ täta kabelgenomföringen.
12. Montera spakknoppen på bärarens spak för 3:e funk-
tion.
10.Lever knob with three buttons.
© HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 170302.
Wireless control
9. Connections to the lever knob
8.Handset with lever knob
19