Wireless control
J11
16
1'2.3
© HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 170302.
Installation, service and maintenance
Connecting the attachment
Connect the electric wire to on the attachment to a trailer
plug on the carrier. Minus to 3/31 and
plus to 5/58R and 7/58L.
4.Jumper position(receiver circuit card)
The receiver have 3 circuit breaks, 9 contacts (4 outlets,
2 inputs and 3 spare contacts) 1 jumper position (J11)
with 3 spots and 11 diod lamps. The transmitter may be
configured to control different attachment.
To set the transmitter for different attachments, use the
jumper position J11, see figure 1.
No jumper mounted
1 jumper in position3
1 jumper in position2
2 jumper in position3 and 2
(000) Sandspreading bucket
(001) Pick-up sweeper
(010) Sweeper roller
(011) V-plow