Advertisement
Instruction Revision: B
S
(046) Portsmouth Dining Table rev. C
Parts List:
(1) Table Top Assembly
(2) Leg Assemblies
(2) Leg Stretchers
(2) Long Aprons
(2) Short Aprons
READ ENTIRE INSTRUCTIONS BEFORE BEGINNING! Carefully remove contents
from box. Make sure that all parts and hardware are included. Place Table Top upside down on
a flat clean surface.
Place Leg Stretchers between both Leg Assem-
blies aligning pre-drilled holes. Attach each end
of both stretchers using (2) 3" Hex 1/4" Lags
(Right Picture).
WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114
C
EASIDE
ASUAL
ENVIRO
(56In x 56In),
Assembly Instructions
Step One: Set Up
Step Two: Leg Stretchers
F
URNITURE
WOOD
Hardware:
46 (16) 3" Hex 1/4" Lags
(16) 3/4" Pan Head Screws
Tools Required:
Phillip's Head Screwdriver
4MM Allen Wrench (Included)
1
Advertisement
Table of Contents
Related Manuals for SEASIDE CASUAL FURNITURE 046
Summary of Contents for SEASIDE CASUAL FURNITURE 046
- Page 1 Instruction Revision: B EASIDE ASUAL URNITURE ENVIRO WOOD (046) Portsmouth Dining Table rev. C (56In x 56In), Parts List: Hardware: 46 (16) 3” Hex 1/4” Lags (1) Table Top Assembly (16) 3/4” Pan Head Screws (2) Leg Assemblies (2) Leg Stretchers...
- Page 2 Step Three: Apron Assembly Place Short Aprons between Long Aprons aligning pre-drilled holes. Attach using a 3” Hex 1/4” Lag on both sides of each Short Apron. Step Four: Apron Attachment Place Apron Assembly on to Leg Assembly aligning pre-drilled holes in the Aluminum and Legs (Left Picture).
Need help?
Do you have a question about the 046 and is the answer not in the manual?
Questions and answers