Installation; Condensing Unit Handling - Emerson COPELAND ZX Series User Manual

Installation

Copeland ZX condensing units are delivered with a holding charge of neutral gas. The condensing unit should be located in such a place
to prevent any dirt, plastic bag, leaves or papers from covering the condenser and its fins. The unit must be installed without restricting
the airflow. A clogged condenser will increase the condensing temperature, thus reduce the cooling capacity, and lead to a high-pressure
switch tripping. Clean the condenser fins on a regular basis.

Condensing Unit Handling

Transport and Storage
Move ZX/ZXD/ZXL unit only with appropriate mechanical or handling equipment according to weight. Keep in the upright position. Do
not stack single boxes on top of each other without pallet in any case. Keep the packaging dry at all times.
Net Weight
ZX
Model Weight (kg)
ZX020BE
ZX025BE
ZX030BE
ZX040BE
1
ZX050BE
ZX060BE
ZX075BE
ZX076BE
Notes:
1 100 kg for models under 60 Hz TF5/7 and 50 Hz PFJ
109 kg for models under 60 Hz TF7
2
117 kg for models under 60 Hz TF7
3
121 kg for models under 60 Hz TF7
4
5 127 kg for models under 60 Hz TF7
Model
76 ZXD040BE
79 ZXD050BE
79 ZXD060BE
91 ZXD075BE
108
112
118
121
ZXD
Weight (kg)
104
2
112
3
114
4
122
5
ZXL
Model Weight (kg)
ZXL020BE 79
ZXL025BE 81
ZXL030BE 81
ZXL035BE 93
ZXL040BE 93
ZXL050BE 106
ZXL060BE 116
ZXL075BE 121
14