Advertisement
How to Install the F Group Assy
1. Turn the Focus Gear Ring of the F Group Assy in the fully counterclockwise.
2. Set the FMR Assy installation portion of the Maintube Assy to the upper side as shown in the figure below, and insert the F Group
Assy.
Match the location pins of the F Group Assy and the straight groove of the Maintube Assy, and insert it.
Focus Gear Ring
Locating Pin
1
2
F Group Assy
FMR Assy installation portion
Maintube Assy
3. Turn the groove of F Group Assy in the counterclockwise direction and attach it.
Groove
F Group Assy
F Group Assy
SEL50F18F (FE 1.8 / 50) (FE 50mm F1.8)
Straight Groove
Maintube Assy
4. Fold the flexible board and put it in the hole.
5. Attach the flexible board to the three holes and the hook.
2-5E
Hook
Hole
Advertisement
