Table of Contents
Advertisement
Responding to Error Messages
65: Wireless LAN connection lost
Are any obstacles blocking the line of sight between the camera and the
antenna of the access point?
Move the antenna of the access point to a position clearly visible
g
from the point of view of the camera ( = 494).
The Wi-Fi connection was lost for some reason, and the connection
cannot be restored.
The following are possible reasons: excessive access to the access
g
point from another device, a microwave oven or similar appliance in
use nearby (interfering with IEEE 802.11b/g/n (2.4 GHz band)), or
infl uence of rain or high humidity ( = 494).
66: Incorrect wireless LAN password
Are the camera and the access point set to use the same password for
authentication?
The setting is case-sensitive, so check upper- and lower-case
g
characters. Make sure that the correct password for authentication is
set on the camera.
67: Incorrect wireless LAN encryption method
Are the camera and the access point set to use the same encryption
method?
The camera supports the following encryption methods: WEP, TKIP,
g
and AES.
If fi ltering by MAC address is active, is the MAC address of the camera in
use registered at the access point?
Register the MAC address of the camera used to the access point.
g
The MAC address can be checked on the [View info] screen
( = 481).
490
Advertisement
Table of Contents
