Fenix Watts 860 User Manual page 59

Parameters
No. Name
20 Select parameter menu language
LANG
Display values measured by ambient
21 AIR.S
sensor
Display values measured by floor
22 OUT.S
temperature sensor (exterior sensor)
Setup type of floor temperature sensor
limit:
The parameter permits to select setup
for floor sensor limit
23 FL.LI
Note: If one of floor sensor limits is
activated, "01" will be displayed in
user menu for the parameter
24 FL.LO Lower limit of floor temperature
25 FL.HI Upper limit of floor temperature
26 REGU Select regulation type
27 T.CY Select duration of proportionality zone
description
Extended Setting Menu
Default value
"GB"
English
"-- --"
No floor temperature
sensor limit set
"NO"
Lower limit is not used
"NO"
Upper limit is not used
"PWM"
Proportionality zone
"10"
59
Other options
"FR"
French
"--.-"
"--.-"
"LO --"
Room sensor with floor temperature
set (lower limit)
"--HI"
Room sensor with floor temperature
set (upper limit)
"LO HI"
Room sensor with floor temperature
set (lower and upper limit)
From 5˚C to "FL.HI"
From "FL.LO" to 37˚C
"HYS"
0.5˚C hysteresis (On/Off)
The value may be increased if