Attach Line Cord to Base
1. Turn treadmill base on its side.
2. Loosen the screw located nearest the edge of the line cord bracket. Remove the other screw on the line cord
bracket and retain hardware.
Item
1
2
3
3. Swing the line cord bracket off the receptacle. Plug in the line cord into its receptacle. Position the line cord
bracket over the line cord.
Description
Line Cord Bracket
M4 X 10 Screw
1.69 Nm (1.25 ft. lbs.)
Power Cord
Page 21 of 35
Qty.
1
2
1