LG ACHH017VBAB Installation And Owner's Manual page 34

STORING THE CHILLER / INSTALLING ANCHOR
BOLTS
Installing Anchor Bolts (Field-Supplied)
• The wooden shipping pallet at the bottom of the chiller must be
removed before installation and tightening the anchor bolts.
• Use anchor bolts to firmly attach the chiller to the installation area
/ base.
• Tighten the bolts so that the chiller does not fall over from strong
winds or earthquakes. Must be engineered by local professional.
• Noise and operation vibration from the chiller can be transferred to
the floor or wall of the installation area. Add anti-vibration material
to reduce its impact.
• Follow all local, state, and federal codes for securing chiller and
base design.
• Open the left / right panels of the chiller, find the anchor bolt lock-
ing points, check anchor bolt attachment hole, and lock the anchor
bolts so the bolts are at right angles to the chiller.
34
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Figure 27: Anchor Bolt Locking Points on the Chiller.
Anchor Bolt Locking Points
Anchor Bolt Locking Points