Maintenance And Cleaning; Cleaning; Oiling The Saw Chain - Parkside PKSA 20-Li B2 Translation Of The Original Instructions

GB IE
falling. If it becomes apparent
that the tree may not fall in the
required direction or is leaning
back, and the saw chain is jam-
ming, stop felling and use wedges
made of wood, plastic or alumin-
ium to open the cut and to tilt the
tree in the required felling line.
6. If the trunk diameter is larger than
the length of the chain bar, make
two cuts.
For safety reasons, we ad-
vise inexperienced users not
to fell any logs with a rail
length which is smaller than
the trunk diameter.
7. After carrying out of the back cut,
the tree falls by itself or with the
aid of the felling wedge or crow-
bar.
As soon as the tree begins
to fall, pull out the saw from
the section, stop the motor,
place the chainsaw down
and leave the workplace us-
ing the withdrawal path. Pay
attention to falling branches
and do not stumble.
Maintenance and

cleaning

Maintenance and cleaning

work must always be carried
out with the motor switched
off and the batteries re-
moved. Danger of injury!
Leave any maintenance and
servicing work not covered
by this manual to our Ser-
vice-Center. Use only original
50
spare parts. Allow the ma-
chine to cool down before all
maintenance and cleaning
works. Danger of burn inju-
ries!
Use cut-protection gloves
when handling the chain or
the chain bar. Risk of cuts!
Switch off the device and remove
the battery before carrying out any
maintenance work.
Cleaning
• Clean the machine thoroughly after
every use. In this way, you extend the
life of the machine and avoid acci-
dents.
• Keep the gripping handles free of pet-
rol, oil or grease. Clean the gripping
handles, where appropriate, with a
moist cloth soaked in soap. Use no sol-
vents or petrol for cleaning!
• Clean the saw chain after every use.
Use a paint brush or wipe for that. Do
not use any liquids to clean the chain.
After cleaning, oil the chain lightly with
chain oil.
• Clean the ventilation slots and the
surfaces of the machine with a paint
brush, whisk or dry cloth. Do not use
any liquids for cleaning.

Oiling the saw chain

Clean and oil the chain regularly.
In this way, you keep the chain
sharp and get optimum machine
performance. In case of damage
due to inadequate maintenance
of the saw chain, the guarantee
claim is invalid. Remove the battery