Long-Distance Recording; Noise-Reducing Recording; External Microphone Recording - Philips VoiceTracer VTR7800 User Manual

Table of Contents

quality is set at 96K/24bit or 96k/16bit, the clips will be

stored in internal FLASH by default.

5.1 Long-distance recording

If you want to record from a large distance (10m), you can

set the recording scenario as long-distance recording. When

choosing long-distance recording, please place mic near the

sound source. During recording, if external microphone or

LINE IN is detected, long-distance recording will be invalid.

The device will default to external microphone or LINE IN

recording.

Note

• The recording type for long-distance recording is

48khz/1536kbps.

• Long-distance recording mode should not be used in

noisy environment.

In an environment of noise, you can use the noise-reducing

mode for recording high-resolution clips. Turn on the noise

reduction button and press Record to enter the recording

pause interface and then press Record button to enter the

noise reduction mode.

Note

• The recording type for noise reduction mode is by default

12khz/384kbps. During the recording process, if external

microphone or LINE IN is detected, long-distance re-

cording will be invalid. The device will default to external

microphone or LINE IN recording.

When you choose to use the external microphone for

recording, please insert the microphone to the external mi-

crophone socket, and then press Record for recording. After

external microphone is inserted, the internal microphone will

be turned off.

Table of Contents

Table of Contents